Print PDF
Favorite
Email
Step 8Elsbett Heat Exchanger and Filters
Our bean-squeezins journey now takes it into the main heat exchanger where it's once again heated by hot coolant. Then it goes through a 8 micron "nominal" filter.
This is an Elsbett brand unit from Germany. There's a temperature sensor on top.
Next to it is a mysterious black dingus.
Ethan says: "The black thing is a primer pump in case you want to pull fuel into the fuel filter before starting the engine and getting air inside. We havent even used it."
This is an Elsbett brand unit from Germany. There's a temperature sensor on top.
Next to it is a mysterious black dingus.
Ethan says: "The black thing is a primer pump in case you want to pull fuel into the fuel filter before starting the engine and getting air inside. We havent even used it."
| « Previous Step | Download PDFView All Steps | Next Step » |
1
comment
|
Add Comment
|
Aug 7, 2007. 5:43 PMggi
says:
That black dingus thing you mention looks like a push-push primer pump I could be mistaken though.
Reply
 |
Add Comment
|
