Print PDF
Favorite
Email
Step 6Drill Holes in Legs
Here you'll drill holes a tad smaller than 3/8" for the hangar bolts. Drill in the center of the 4x4.
Screw in the hanger bolts by placing two nuts on the threaded section to act as jam nuts, then use a hex wrench or ratchet to screw them in to the desired depth.
Screw in the hanger bolts by placing two nuts on the threaded section to act as jam nuts, then use a hex wrench or ratchet to screw them in to the desired depth.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
