Instructables
Picture of Bleeding Airsoft Target
In this instructable i'm going to show you how to build a target that appears to bleed when shot with an airsoft gun.  
 
Remove these adsRemove these ads by Signing Up

Step 1: What you need

1. Airsoft gun and bbs   2. Marker Pen   3 Red food colouring   4 A4 paper    5 Sandwich or ziplock bag   6 Cellotape  7 Big Cardboard box 

Step 2: Fill

Picture of Fill
Fill the plastic bag with warm water and add the food colouring. Shake the bag and seal. Put it to one side.

Step 3: Draw

Picture of Draw
Draw a target on the A4 piece of paper. 

Step 4: Tape

Picture of Tape
WP_20130820_005[1].jpg
Tape the bag of 'blood' to the box firmly and tape the target on top of it
Ranie-K1 year ago
Use karo surup instead of water -that's what Mythbusters used for fake blood.