These are the instructions for my helicopter "Blitz Seeker", and hopefully you will enjoy building the model. there will be descriptions on each step and also a list of the parts you need below this paragraph. The steps are pictures of a number of parts and also some of the steps are how the "sections" connect to each other. There are also parts lists for each step. and lables on some pictures.
          Hope you enjoy building my creation!
                    MattJoeP

     Parts list:
          Rods - Stiff.                    Connectors                                 Misc.                               Wheels
Green: 29                         White: 14                                      Hub connection: 4       Extra Large: 1
White: 23                          Red: 8                                           Short Blue End: 2        Big Low Profile: 1
Blue: 17                            Blue: 6                                          Black Ball End: 1         Small Black: 2
Yellow: 12                        Purple: 10                                    Grey Spacer: 3
Red: 3                               Yellow: 19                                    Blue Spacer: 1
Grey: 22                            Green; 24                                    Pink End: 2
          Rods - Bendy.       Grey (Two Sockets): 5
Long: 22                           Dark Grey (One Socket): 11
Short: 11                          Orange: 24

Step 1: Make the Base

You will need:
4 Green rods
4 white rods
2 Yellow rods
2 Short bendy rods
2 Red rods
7 Grey rods
8 Purple connectors
6 Yellow Connectors

Step 2: Make the Lower Frame

You will need:
4 Green rods
2 White rods
2 Blue rods
5 Yellow rods
5 Grey rods
2 Long bendy rods
2 Purple connectors
6 Blue connectors
6 Green connectors
6 Orange connectors
2 Red connectors

Step 3: Make the Gun

You will need:
2 hub connectors
1 black ball end connector
2 white connectors
10 blue rods
1 yellow rod.

Step 4: Connect the Gun to the Lower Frame

You will need:
Gun
Lower Frame

Step 5: Connect Lower Frame to the Base

You will need:
Lower frame
Base

Step 6: Make the Tail

You will need:
2 grey rods
6 white rods
3 green rods
1 short bendy rod
7 long bendy rods
4 white connectors
4 green connectors
2 yellow connectors
2 orange connectors

Step 7: Add the Tail Rotor

You need these pieces shown and the tail you just made.

Step 8: Connect the Tail to the Lower Frame

You will need:
Lower frame assembly
Tail and rotor assembly

Step 9: Make the Upper Frame

You will need:
3 grey rods
2 blue rods
3 white rods
2 green rods
4 long bendy rods
2 short bendy rods
5 white connectors
2 green connectors
4 orange connectors

Step 10: Connect the Upper Frame to the Lower Frame

you will need:
Upper frame
Lower frame assembly

Step 11: Connect the Tail to the Uper Frame

You will need:
4 grey connectors
2 white rods
2 pink ends
rest of helicopter

Step 12: Make the Top Rotor

You will need:
8 grey rods
4 short bendy rods
4 yellow rods
12 green rods
2 white connectors
4 grey two socket connectors
8 yellow connectors
4 grey one socket connectors