Blowable LED candle

Step 5: Step 4: prepare the LED candle

Make a little loop at the end of LED legs, and knot the other side of the conductive thread coming out from target paper.

Make sure that the direction of LED is correct. In general, LED's longer leg should be connected to + and shorter one to the -.
In this example, I placed button battery with + facing the paper, so the thread coming directly from the battery goes to my LED's longer leg, and threads coming from tilt switch goes to shorter leg of LED (-)

After making the connection, I taped them inside the candle paper, so that it does not touch inside.