Instructables
Picture of Blu The Finger Puppet
 
Remove these adsRemove these ads by Signing Up

Step 1: What You Need

Picture of What You Need
Fabric Buttons x 2 Rope ( thin ) Thread & needle

Step 2: Shape Him

Picture of Shape Him
Cut out an average shape out of the material keeping in mind that once its inside out you will need to fit it on your finger

Step 3: Give Blu A Face!

Picture of Give Blu A Face!
Sew on two buttons onto the front of the fabric Then give your monster a smile! I used embroidery cotton to create teeth ^ _ ^

Step 4: Sew Him Up! :P

Picture of Sew Him Up!  :P
Put the material face to face ( the part that you want to see will not be visible ) , add in the pieces of rope inside so that the can be attached too !

Step 5: Time To Get Him Inside Out!

Picture of Time To Get Him Inside Out!
Now push the puppet inside our to view your creation! Add some triangles to his antenna's and you're done ! Blu is fun and easy to make for all ages , it's simplicity allows you make one for each finger within an hour I'd you really wanted to ! Hope this brought a smile to your face :) Feel free to follow me