Print PDF
Favorite
Email
Step 3Make the cap
Design is very simple just:
1. Prepare your bottle cap.
2. Drill hole and place 3 leds in it.
3. Glue leds with hot glue.
4. Solder your leds and switch.
5. Connect leds with a battery.
There is schematics.
You can add some crystals like i did. ;)
1. Prepare your bottle cap.
2. Drill hole and place 3 leds in it.
3. Glue leds with hot glue.
4. Solder your leds and switch.
5. Connect leds with a battery.
There is schematics.
You can add some crystals like i did. ;)
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
