Print PDF
Favorite
Email
Step 4Test and Reassembly
Go ahead and plug the mouse in and if the light comes on, mount the pcb back into the base.
Get the cord back into it's slot through the base, and screw the top back on.
If the mouse's feet will not stick back on over the hidden screws, regular emblem mounting glue, super glue, or even silicone sealant will work to stick them back in their place.
The light is one idle in the 2nd from the last picture, and is active in the last one.
Get the cord back into it's slot through the base, and screw the top back on.
If the mouse's feet will not stick back on over the hidden screws, regular emblem mounting glue, super glue, or even silicone sealant will work to stick them back in their place.
The light is one idle in the 2nd from the last picture, and is active in the last one.
| « Previous Step | Download PDFView All Steps | Next Step » |
2
comments
|
Add Comment
|
Nov 24, 2010. 2:05 PMzikicamiskovic
says:
did the blue led work like red or?
Reply
1
Oct 19, 2011. 7:44 AMOllus
says:
today i did this mod with white led i got from a flashlight cigarette lighter :) it is more precise, but it has to be flat on white surface. Blue and violet (not UV) work the best though :-)
Reply
 |
Add Comment
|
