With Instructables you can share what you make with the world, and tap into an ever-growing community of creative experts.
My mum wanted to play some music from my desktop computer on her stereo(which doesnt have usb support but has stereo jack audio input) - and I was ...
This is the circuit diagram
You are going to need: 1. Bluetooth headset 2.Stereo jack(3.5mm) 3.Soldering iron and wire 5.Hot glue gun 4.Thin wire 5.General tools - e.g wire stripper
Take the cover off and be carefull with the small wires inside
strip of the casing of the stereo jack if needed to
Solder two wires to the stereo jack - bridging the top 2 connections for left and right(black wire ) - then ground wire on third connection (white wire) ...
Make a small hole on the headset cover and insert the stereo jack then glue it on with hot glue
Solder the wires from the stereo jack to the headset wires be very careful because you might end up pulling the wires off like I did
Put the cover back and you have a finished product - tadaa!
Plug in your headset to the input(female stereo jack) of the stereo Turn it on and pair it to your computer Play some music
Join 2 million + to receive instant DIY inspiration in your inbox.
Download our apps!
© 2016 Autodesk, Inc.