Introduction: Bluetooth USB Module Mini for PcDuino

Picture of Bluetooth USB Module Mini for PcDuino

Bluetooth is a kind of Radio technology which support equipment short-distance communication (generally within 10 m). Include mobile phone, PDA, wireless headset, notebook computers and related peripherals, and many other devices between wireless information exchange. Using “Bluetooth” technology, it can effectively simplify the communication between the mobile communication terminal equipment, can successfully simplify communication between the equipment and the Internet, making the data transmission more efficiently, and broaden the road for wireless communications. In this post, we will talk about how to use USB Bluetooth adapter for pcDuino.

Step 1: Preparation

Picture of Preparation

First, we need to install the following software module:

$sudo apt-get install gnome-bluetooth

Plug in Bluetooth USB dongle, and check the USB device:

<a href="http://www.pcduino.com/wp-content/uploads/2013/05/12.jpg">http://www.pcduino.com/wp-content/uploads/2013/05/12.jpg</a>

Step 2: Procedure

Picture of Procedure

1. Run the “bluetooth-sendto” in the terminal
2. Select the file that needs to be sent:
3. Scan for destination Bluetooth device, and select the device:

Comments

ChristopheT (author)2015-04-05

Good!

And how receive files?

About This Instructable

2,976views

19favorites

License:

More by Yanny Guo:Use pcDuino as Photo Booth ControllerUse Si4703 FM Breakout Board on Arduino UnoUse SIM900 GPRS/GSM Shield on pcDuino
Add instructable to: