loading
Picture of Bob's Perfet Side-arm
ive been longin for the pefect knex guns and i thought i could make a pretty good side arm.
it is based on TheDunkis' TDS2 (so it would only be fair to give him some of the credit) but it has alot of mods. this is my first instructable so don't be too harsh :) please comment and post your mods.
 
Remove these adsRemove these ads by Signing Up

Step 1: Body/ Barrel

I haven't made this too detailed because i think it's simple enough.
1. top
2. back
3. middle
4.end
5. under middle
6. under end

Step 2: Magazine

Picture of Magazine
Picture 23.jpg
Picture 24.jpg
Picture 44.jpg
Mag...
1. the mag
2. left side
3. left lower
4. ammo

Step 3: Trigger

Picture of Trigger
Picture 16.jpg
Picture 17.jpg
This is the trigger used in the TDS2 (credit goes to TheDunkis and any1 elso who made it- i thinks he was the first... ask him if u must)

1. trigger
2. trigger
3. take off the brown tanclip wen u put it on

Step 4: Funky bits.

Picture of funky bits.
Picture 36.jpg
Picture 33.jpg
all the little decorations and stuff.
i dont think they need much detail, simple enough.

1. handle
2. front bit
3. sight

Step 5: Put is all together

This doesn't really need a slide but i may as well.

1. ammo to barrel
2. -connected
3. sight to barrel
4. -connected
5. thing at the front.
6. handles
7. -conected
8. mag pusher
9. -inside.
10. trigger.
11. tigger

Step 6: Rubber Bands

Picture of Rubber Bands
Picture 47.jpg
Picture 48.jpg
Picture 49.jpg
Picture 50.jpg
Picture 51.jpg
it doesn't really matter where you put the bands but here are a few pics anyway

1. mag pusher
2. up here (btw it doesn have to go behand the grip/ handle if its ontop it holds it on better)
3. over this bit
4. use to bands on the ram.
5. here
6. trigger.


ive spent a pretty long time on this so plz tell me if it any good and if i should post more guns n stuff.