Introduction: Sniper Rifle

Picture of Sniper Rifle

HERE IT IS!!!!! My 5 shot sniper rifle. I made a few changes since the slide show, like a new trigger,and upgrading the strength a bit. Well then lets get started. If you get stuck ask me in the comments.


Step 1: Bi-pod

Picture of Bi-pod

I dont know if this is a bi-pod. It has four stands. maybe its a quadropod any way it props up the gun. Its pretty simple to make just follow the pics!

Step 2: Mag

Picture of Mag

Here is the mag also pretty easy just follow the pics.

Step 3: Barrel

Picture of Barrel

Here is the barrel.

make 6 of these
4-5.put together like this
12.make 2 of these
15.add white rods

Step 4: Stock and Handel

Picture of Stock and Handel

This is pretty easy. Just put together. Follow the pics.

Step 5: Scope

Picture of Scope


Step 6: Trigger

Picture of Trigger

Also simple

Step 7: Main Body

Picture of Main Body

this is confusing but if you follow the pics you should be able to make it. As I said before if you get stuck just ask me!!

Step 8: Putting It Together

Picture of Putting It Together

Almost Done
1. add mag
2. add trigger
3. add stock
4. close up
5. make and add
6. aerial view
7. make and add
8. aerial view
9. add barrel
10. close up
11. add white rods for mag suport
12-13. build
14. add
15. mag pusher
16. put in mag
17. add scope
18. add bi pod or quadropod or whatever
19. connect like this
20. add connectors
21. build ram (remember to add elastic and tape well)
22. add blue rod
23. put ram into gun
24. add blue connector

Step 9: Rubber Band Placement and Loading

Picture of Rubber Band Placement and Loading

For this gun I only use 1 elastic band for the ram, but you can use more. In total you need 3 elastic bands 1 for ram, 1 for trigger and 1 for mag.

1. rubber band
2. get elastic and put 1 twist in it
3. fold over like this
4. put on gun like this

Loading: this gun has a mag that holds 5 blue rods.

5. ammo
6. put in mag
7. insert mag pusher
8. add blue rod
9. add rubber band
10. pull band over like this and connect to blue rod on opposite side.
11.add elastic for ram


Step 10: One More Thing

Picture of One More Thing

Wait one more thing. How to put the bi pod or what ever up.
Well all you have to do is open it and add white rods.

and one more thing people are getting confused on how to hold it well look at the pic.

Don't Forget To Rate!!!


STUNTMANIC101 (author)2011-01-23

Does it use any moddfied or broken pieces before I build this mental machine

that's what i thought as well, but it doesn't

SomeAsianKid (author)2011-01-02

You have nice floors :D

mrmplaster (author)2010-08-05

it took a while but awsome man the barrel wobbles a bit but your holding the barrel so its ok but flipin awsome sniper

mrmplaster (author)2010-08-05

can i use yellow connecters for the orange ones

General D3 (author)2009-08-23

would it be possible to make his without the stock and handel?

mrmplaster (author)General D32010-08-05

ive got a idea for u sub k dawg and buy the 1000piece tub and come and make it with that u can make 4 of these lol

mettaurlover (author)General D32009-10-18

no. every gun needs a handle, no matter how small. the stock can be abridged for piece conservation, but i don't think it would be a good idea to completely eliminate it.

muffinslayer2 (author)2010-04-03

I made it and this gun is AMAZING (a LOT bigger than I thought it was gonna be....3 ft maybe?)

thewormman (author)muffinslayer22010-05-06

 Great gun, first i thought the bullet wouldn't leave the barrel then....WOOSH (nearly took my hand off) great gun 5* !!!!

muffinslayer2 (author)2010-04-03

Almost there!

muffinslayer2 (author)2010-04-03

Pics are out of order with the words

MegaMetal8 (author)2010-03-18


Danielzxzx1 (author)2010-03-06

I think this would be better instructions if you have a picture of the 2nd layer.

james4 (author)2009-11-12

can you use some thing else be side hinges i only have 3 pares

Danielzxzx1 (author)james42010-03-05

james4, Not sure if this would work since I never tried it yet but maybe the ball point and ball socket could replace the blue and green connecter thingys

Mac1997 (author)2010-02-28

very good gun

bluelarz (author)2009-09-06

i made this gun and it is very flimsy, like a wet noodle. It shoots outstanding though, i'd say 20 feet max.

FlutterTree (author)bluelarz2010-02-19

I get it!

knexjay (author)bluelarz2009-12-25

lol i made a dinky little pistol and it shot at least 65ft u say 20 feet is outstandingz/ cause 65ft is 15ft more than average pfft

mikstr2 (author)bluelarz2009-12-19

i made a gun just like this and it went 70some feet, so you must have lousy bands because this is just like mine

KnexFreek (author)bluelarz2009-11-30

i started cracking up when i read this!!! lol !!

wihskas2 (author)2010-02-17

i love this gun =)

gabhoot (author)2010-02-13

can u subsitute the black and blue piece on the trigger for something??

Pressure982 (author)2010-01-27

Is there an easier way to connect all 3 parts of the stock? Trying to cross snap the white rods with the stock hurts my thumbs because i have so little leverage.

ditty do (author)Pressure9822010-02-10

This is the most realistic sniper on the sit e and it has a true barrel and trigger.

nathanhudy (author)2009-11-15

 how far does it fire

Capt. Kidd (author)2009-06-10

nice one, although no bolt... but thats fine with me. you get: 5/5 for mech 4.5/5 for detail 6/5 for making it look nice with the mech annnnnnnnnnnnnnndddddddd... added up for 10/5! (dont know if its possible, but i give it to you.

smattman22 (author)Capt. Kidd2009-11-13

you need the average 5 + 4.5 + 6/3= 5.16 but you would want 5 for the mech so it would be 4.83 that would be the correct term. 

s0lekill3r (author)Capt. Kidd2009-06-11

Adding fail?

5 + 4.5 = 9.5

9.5 + 6 = 15.5/15*

Simplify it and you can approximately figure 5.19/5*

Capt. Kidd (author)s0lekill3r2009-06-25


Capt. Kidd (author)s0lekill3r2009-06-25

oops... your right. oops... again... u replied like 2 weeks ago

insanecreator92 (author)2009-11-09

Nice gun.

auketake (author)2009-11-01

how far does it shoot

caseysath (author)2009-10-20

can you do the stock with only 2 layers instead of three?

caseysath (author)2009-10-17

how many pieces and what type does it require?,a it looks good but i don't know if i hav enough to build it

Merugop (author)2009-08-30

Please give Viccie.B1993 credits for this gun too because the mag is from his El Diablo and the mechanism too Search nb-4

Merugop (author)2009-08-29

Can you make it with out that really long barrel?

nerfdude (author)2009-08-28

It's a Bipod.

fartnitro (author)2009-08-14

Woo 5/5 this is great, got stuck on the main body part though =( but still i can't wait to shoot out of my window into the gardern! (i hope i don't lose the bullet, the grass is so long i could lose my sister-wait, thats a good thing-in it!)

J Moneyman (author)2009-08-11

piece count?

Mighty930 (author)2009-07-06

What is the name of the instructions for the gun on the right?

K-Dawg (author)Mighty9302009-07-07

i haven't posted either of them yet

Mighty930 (author)K-Dawg2009-07-07

when will u post them?

K-Dawg (author)Mighty9302009-07-08

Its posted Its called The Rhino Pistol here is the link

K-Dawg (author)Mighty9302009-07-07

Im not posting the sencond one, but the first one should prob be posted by the end of the week.

crousekid (author)2009-07-02

how far does it shoot

K-Dawg (author)crousekid2009-07-05

about 80ft I think

knexman27 (author)2009-06-30

they both look good to me please post. how many bullets can the first one hold?

K-Dawg (author)knexman272009-07-01

7 r 8

About This Instructable




More by K-Dawg:ScopeThe Rhino PistolSniper Rifle
Add instructable to: