Introduction: Boneless 2: Off a Wall (Boneless to Wall Plant)

Picture of Boneless 2: Off a Wall (Boneless to Wall Plant)
  • You have to know how to boneless
Items needed:
  • Skateboard
  • Wall

Step 1: Ride

Picture of Ride

The first step is to ride up to your target, which, in this case, is the wall. You can go any speed that you are comfortable with. I usually go a medium speed, but for this Instructable, I went kind of slow.

Step 2: Grab and Step

Picture of Grab and Step

A couple feet from the wall, reach down and grab your board. While you are doing this, your front foot should be stepping off and planting itself.

Step 3: Pulling Up

Picture of Pulling Up

Start to pull up your board while keeping your back foot on it. Your front foot should stay where your planted it.

Step 4: Turning

Picture of Turning

Continue to bring your board up. While bringing it up, start to turn your body. Your back foot should start to come off, but not too much.

Step 5: Planting Your Back Foot

Picture of Planting Your Back Foot

As you continue to turn, you will need to bring your back foot off and plant it on the wall. Your front foot (on the ground) will probably need to start to come up.

Step 6: Pushing Off Wall

Picture of Pushing Off Wall

Once you get your back foot on the wall, you will need to push off the wall. Your front foot should be off the ground (or almost). You will still need to keep turning your board.

Step 7: Bringing Legs In

Picture of Bringing Legs In

You will now need to bring your back foot off and pull your front foot up. Your board should be completely turned 180 degrees from starting point in step 3.

Step 8: Preparing to Land

Picture of Preparing to Land

Let go of your board and start to straighten legs.

Step 9: Landing

Picture of Landing

Continue straightening legs. Your feet should be on your board now.



Land and stick your landing. Ride off. 

Step 11: Here's a Video


MarkSaidWhat (author)2014-03-23

You have some good instructables. You should post more on skateboarding for n00bs like me.

msemtd (author)2012-09-03

Nice quick little skate instructable -- I feel inspired to perhaps make one of my own!

ZackBlack (author)2012-08-24

No comment...

NuttinNate (author)ZackBlack2012-08-24



ilpug (author)2012-08-24

Nice. There needs to be more skating tutorials like this.

NuttinNate (author)ilpug2012-08-24

Thank you. I have other ones from 2010/2011. I will be making more soon.

About This Instructable




Bio: I skate. I am also good w/ electronics.
More by NuttinNate:How to make a Simple House Drum Pattern (128 BPM)Boneless 2: Off a Wall (Boneless to Wall Plant)How to Boneless
Add instructable to: