Bookend made of CDs.

Here's how to make a decent bookend out of used CDs.
Firstly, gather materials up(no glue needed):
1.soldering iron
2.three or more CDs
3.bow saw

Step 1 Cut the slices

As the picture shown below,three cds are needed here,two as the base and back ,and two slices as strengthening ribs.

Use a bow saw to cut all the cds with proper size and two grooves on the base cd for mount ribs.

Comments

[Gonazar]

Don't you get melted plastic stuck to your soldering iron?
I think I would go with an epoxy instead.

[13senses]

Yaeh, glue is a better solution, that's the awesomeness of instructables, thing improves.

[LuminousObject]

That's why you would either use a different tip from normal or use a different soldering iron.

[Treasure Tabby]

Oh a great use for duds.
Will have to try. :)

[j574sbi]

could super or gorilla glue accomplish this?

[gnuoy]

I tried with super glue and it worked perfectly, already made 8 here

[gnuoy]

Seems very interesting, will try to make some later :3

[Dsk001]

I finally have a use for those extra clear disk's in the blank dvd spindles.

[NeonLime]

Great Idea! "Soldering" Them Is A More Permanent Way To do It But Used A Soldering Iron On Anything Other Than The Solder Can Ruin It, Otherwise A Great Idea!

[Ortzinator]

Just make sure the tips are replaceable. :P

[ll.13]

Looks good! (:

[13senses]

Ths ,and so do your PCB bracelet.what a cool stuff it is.

[LinuxH4x0r]

good idea!