Print PDF
Favorite
Email
Step 3Paint 'yer Board!!
Make it all nice and pretty-like. Try not to paint where the epoxy will hold the bottle to the board. I also drilled a hole in the base to run the cord through so that it would be somewhat hidden.
After the paint is dry, mix the epoxy tubes and carefully smear it on the bottle and press it on the board. Let dry.
After the paint is dry, mix the epoxy tubes and carefully smear it on the bottle and press it on the board. Let dry.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
