Print PDF
Favorite
Email
Step 26Step Twenty Six
Insert the hex bushing adapter into the end of the plunger tube and mark it as shown as well.
You don't want to drill the holes in the hex bushing too far forward or it will prevent you from installing a barrel.
Using a 5/32" bit in a drillpress or power drill drill where marked on both sides of the hex bushing.
You don't want to drill the holes in the hex bushing too far forward or it will prevent you from installing a barrel.
Using a 5/32" bit in a drillpress or power drill drill where marked on both sides of the hex bushing.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
