Print PDF
Favorite
Email
Step 30Step Thirty
While depressing the catch plate by hand, slide the plunger rod through the plunger cross, center frame piece, catch plate, and rear frame piece.
Reattach the plunger tube assembly to the rest of the gun, starting with the 1/4" length screws.
Attach the priming handle to the exposed end of the plunger rod.
You can make and attach either one or two of these depending on your preferences. Other handle options are possible, but the other methods I've tried weren't as comfortable as this one.
Reattach the plunger tube assembly to the rest of the gun, starting with the 1/4" length screws.
Attach the priming handle to the exposed end of the plunger rod.
You can make and attach either one or two of these depending on your preferences. Other handle options are possible, but the other methods I've tried weren't as comfortable as this one.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
