Print PDF
Favorite
Email
Step 36Step Thirty Six
Attach the front of the grip to the side pieces using 3/8" screws as shown. Hook the loose end of the rubber band onto the 3/8" screw you installed on one side of the trigger.
Hinge the grip into place over the rear frame piece and attach it to both the rear frame piece and side pieces using four 3/8" screws.
Hinge the grip into place over the rear frame piece and attach it to both the rear frame piece and side pieces using four 3/8" screws.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
