With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
you will need: a bit o' duct tape a ruler or something like that scissors/ x-acto knife/ sharp edged thing
Cut yourself a decent size of duct tape (about 3 inches [eyeball it]) then clip the ends just a bit so it looks clean and even. Measure your clean str...
Doodle (if you want) on your 2 in. strip
Turn your strip over, if you doodled, to the plain side. Scrunch a little of the top to the inside then pinch it to the middle. Do the same to the bot...
Cut a slim strip, the length of the width of duct tape, and wrap it around the middle of the bow to keep it scrunched.
Now cut a 4 inch long strip of duct tape about 1/2 inch in width. Fold it in half, this will be the band.
Align the middle of the bow to the middle of the band and tape them together with a skinny strip of tape the length of the width of duct tape.
Put the band on your finger bow side up. Size the flaps to your finger and mark where they end. Tape them with a tiny piece of tape down.
Check Durability, fix mistakes, spruce it up + you're done:)
Remove these ads by
Signing Up
Not NiceInappropriateSpam
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Visit Our Store »
Go Pro Today »