Introduction: Box Frame Lego Display
Welcome to another instructable
While re decorating my nephews room and feeling the pain of stepping on his Lego I thought of a good way to display and mount some of the sets
Step 1: You Will Need.....
Thick frame box ( £5 from cargo )
Desired Lego set
Printer and photo paper
Step 2: Decisions Decisions
Once you have you frame the rest is easy, simply choose you desired Lego set and your ready to begin
For this I choose the teenage mutant ninja turtles as these were my caves back in the 80's
Once chosen get the frame and remove the backing
Step 3: Glue and Glue
No the frame I choose had a ready made mount installed in which was handy and ideal for what I wanted, but you can make your own of any colour simply taking out the glass carefully and using it as a template.
Once you have taken the mount out you can decide how and where you want to mount your figures. I decided on mounting the 6 ( 4 turtles, splinter and shredder ) evenly and around the edge.
Once the spacing has been decided you can simply heat up the glue gun and glue them straight to the mount
Step 4: Almost Done
Now with the characters stuck to the mount, you can choose your picture, this can be anything but for the sake of argument I went for the classic logo for the tmnt
Once printed out and trimmed to fit the picture you can bring it all together
And your done that simple
Step 5: Trial and Error
Now done you can try other examples to make and together they look quite good on the wall
Ideal for boys and girls and any type