Print PDF
Favorite
Email
Step 2Make a bracket to hold the pipe to the rack
I got lucky when I bought my rack in that it came with several different sized and shaped metal mounting brackets for securing the rack to the eyelets on the back of my bike. One of the brackets was suited perfectly for this project. All I had to do was make an extra bend or two to get the shape I needed.
Using your favorite clamp (Vise grips, pliers, C-clamp, etc.), bend your bracket to suit your particular rack. You may need to use a hacksaw to cut the bracket. If so, consider using a file to smooth out any sharp edges or burrs.
Using your favorite clamp (Vise grips, pliers, C-clamp, etc.), bend your bracket to suit your particular rack. You may need to use a hacksaw to cut the bracket. If so, consider using a file to smooth out any sharp edges or burrs.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
