Print PDF
Favorite
Email
Step 5Remove retaining pins
Now, remove the two pins which actually hold the brake pads in place in the caliper.
As shown here, I used a SMALL hammer, and a drift punch, and gently tapped them out. You may simply be able to grab the head with pliers and twist/pull it out.
As shown here, I used a SMALL hammer, and a drift punch, and gently tapped them out. You may simply be able to grab the head with pliers and twist/pull it out.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
