Introduction: Brandon Thompson's Robot

Picture of Brandon Thompson's Robot

All you will need for this is the cut out, tape and a pair of scissors///.

Step 1: Step 1

Picture of Step 1

Cut out the two identical rectangles. Roll them up like a straw, long ways and tape them closed. These will be the feet/legs.

Step 2: Step 2

Picture of Step 2

Cut the larger rectangle out, and fold it along the dotted line. Tape the square closed.

Step 3: Step 3

Picture of Step 3

Cut out the long skinny bar (arms) and tape it directly below the robot’s face

Step 4: Step 4

Picture of Step 4

Place the large head that was made perpendicular to the rolled straws, and taped them to the head. One on each side.

Step 5: Step 5

Picture of Step 5

All done, you have a new buddy!


About This Instructable




Bio: Mobile + Web in Multimedia Arts at Berkeley City College is a Front-End Design and UI/UX Design incubator in Berkeley California. Our classes prepare students ... More »
More by MMART at Berkeley City College:CatBot9000LionBotEquality Bots
Add instructable to: