Introduction: Brandy Box Wallet

Picture of Brandy Box Wallet

This is my first Instructable... Yeeeeey!
I made this after a drinking session with my buddies.

Drunk a bottle of brandy and instead of throwing the box away I decided to make use of it. So, I made a wallet out of the box.

Thought I'd share it with you.

Step 1: Materials Needed

Picture of Materials Needed

In this project i used:
a box of brandy ( you can use other similar boxes... johnnie walker boxs are great for this )
a cutter or anything you use to cut stuffs
glue or better adhesive
clips or clamp

Step 2: Measure & Cut

Picture of Measure & Cut

with a dollar bill i measured and marked the box. next is to cut it out.

Step 3: Fold

Picture of Fold

fold the box to shape it like a wallet

Step 4: Cut Again

Picture of Cut Again

on the inner side bottom of the box cut off about 1cm part of it. you will see why on the next step.

Step 5: Uhmm... Fold Again

Picture of Uhmm... Fold Again

fold the outer part into the inner part which you cut-off.

Step 6: Stick It

Picture of Stick It

using the glue, stick two bottom parts together. i used clips to hold it together

Step 7: Wait and It's Done

Picture of Wait and It's Done

give the adhesive some time to dry. after drying, take off the clips and you're done. you can now put your money in your fancy wallet.


About This Instructable



More by cusspier:Brandy Box Wallet
Add instructable to: