Step 8: Find the Monkey a Home

Originally I was going to hang this little monkey from my rear view mirror but in the end I decided to use it as a key hanger.

So I soldered on a small section of wire to the upper arm and sharpened it. Now I had a way to hang it onto a wall.

Thanks for reading.
<p>Thats a navy saying (the cannon balls were iron the storage bowl brass, in cold weather due to diff rates of contraction the balls would roll off)</p>
<p>AArh already said BUT it is true(ish)</p>
<p>It looks like the balls have frozen off that brass monkey</p>
That funky monkey
Hang it outside, then you can say its brass monkeys outside whatever the weather
Brass monkey... That funky monkey...
I was reading a cookbook I picked up at Goodwill in Frederick,MD for USS Terrebonne (LST 1156) named after a Parrish of Louisiana. In it is a story of how on ships of &quot;The Wooden Navy&quot; that cannonballs could be stored close to the guns w/o rolling around by stacking in a 4 sided pyramid fastened to the deck with a brass plate (To prevent rusting) with indentations for the cannonballs stating the device was called a &quot;Brass Monkey&quot; &amp; the indications in cold weather of the different metals. : ) Another good project!
I remember hearing about this once in from a Navy man. He said that they used to place cannonballs on the decks, but they would roll around and cause trouble, so devices known as &quot;monkeys&quot; were fashioned to hold the cannonballs. The &quot;monkeys&quot; were first made of iron which allowed rust to form, rendering the cannonballs useless, as they could not be fired. Later, the monkeys were made of brass, which would not rust. However, the brass would expand and contract at a different rate than the iron balls and in very cold conditions, the brass would shrink to such an extent that the balls could roll out if the ship listed. This is (apparently) the source of the term &quot;cold enough to freeze the balls off of a brass monkey.&quot; However, this is apparently not true, as shot was usually kept below decks...
Thanks! I had no idea I was swindled by an urban legend! Shawn
you never cease to amaze me.
If you're searching for dapping/dopping punches to ball end tool used in this 'ible I got mine from Harbor Freight for about $40 with a wide range of punches &amp; a block of matching dished shapes. Some folks in jewelry making blogs say the tools aren't quality, but they work for me! If you like paying more Rio Grande &amp; Contenti also sell them.
That's the exact set I have. Works just fine for me. Thanks for the info.
Great photos, and you certainly have a skill at shaping brass. This gives me an idea for making embossed signs for our herb garden - Oregano, Sage, etc.
Thanks and hooah!
You are &quot;da Man!&quot; I would say that now I have something I can do with the brass bones, after I cut all the ends off (for other projects). I'd sure like to give this a try. Tools: the rounded tool... is that a &quot;dapping&quot; tool (is that the name?)... I've seen some of these tools on Etsy (as I'm geographically limited on fancy hobby tool buying places, I have to buy online). <br>Speaking of &quot;buying online&quot;.... if anyone else wants to try this project, but you don't have the brass... please feel free to private message me, or contact me at whteagle2003@yahoo.com (put something in subject line to remind me)... I have brass (with and without the primer ends). I might even be convinced to cut and flatten them for you! Not only do I have the brass ones, but I also have some with a copper based alloy. Might be interesting for some projects requiring some varied color. <br>Thanks again Balleng, for such an awesome project! If you decide to sell one of these, please let me know where to find it... I've got 4 teenagers (19-13), 3 dogs, some thousand cats, and a wife... Throwing a monkey in the mix would be just the thing!
I think &quot;dapping tool&quot; is correct. It came in a set from harbor freight for $40. Don't forget to share some photos with what you make. Thanks!
Always amazed by your ingenuity. Nice work and thanks for the additional tricks.
MAN!!! Your creativity and talent never fails to amaze me, Great, great, job! =D
Looks like it got really cold... Great project! I have a bunch of 30-06 shells, I might do this!
Good one, Ive got some calibers I don't reload I'll have to try this Ingenious project.
this is soo cute
Absolutely amazing, I could quite figure out how you got such precise shaping for the face, your method is plain genius.<br><br>Another great, keep it up!

About This Instructable


74 favorites

Bio: Fish Bone. Paracord's new best friend.
More by Mrballeng: Cord Keeping CRAB Laundry Room Cabinets. DIY. Acrobat Cable Cam
Add instructable to: