Instructables

Breadboard Adapter for the Raspberry Pi

Featured

Step 3: Solder IDC Box Header

Picture of Solder IDC Box Header
RPi_Breadboard_Adapter_BoxHEader_Soldered.jpg
Once we've cut our strip board to size we can solder the 26-w IDC box header to it. 

It's easier if you use something to hold the strip board will you try to solder it. I used a drill vice, but anything that will keep the strip board steady will do.

Fit the 26-W IDC Box Header to the strip board and place into vice. Start off by soldering the four corners of the IDC Box Header. Once done solder the rest of its pins.

 
Remove these adsRemove these ads by Signing Up
Pro

Get More Out of Instructables

Already have an Account?

close

PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format. You also have the ability to customize your PDF download.

Upgrade to Pro today!