Instructables

Bristle Bot from PS2 Controller Motor

Featured

Step 2: Assembly

Picture of Assembly
Remove the motor from the PS2 controller. Note that there may be some open holes on the back, cover these with a tiny bit of tape to keep hot glue from jamming the motor. Using the hot glue, attach the motor to the side of the battery holder, on the opposite side of the battery terminal clips. Make sure the motor is centered side to side, as if it is not centered the bristle bot may tend to turn in one direction.

 
Remove these adsRemove these ads by Signing Up
Pro

Get More Out of Instructables

Already have an Account?

close

PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format. You also have the ability to customize your PDF download.

Upgrade to Pro today!