Introduction: Brush Bot

Picture of Brush Bot

Makers: Ranjan Gowda

Location: Banjarapalya E4D Maker space



2.pager motor

3. Double sided tape

4.Coin cell


1.Nose player

Step 1: Cut the Brush

Picture of Cut the Brush

First take any old brush and cut it like this with the help of nose player.

Step 2: Stick the Pager Motor

Picture of Stick the Pager Motor

Take the pager motor and double sided tape and stick it to the brush.

Step 3: Fix the Coin Cell

Picture of Fix the Coin Cell

After stick the pager motor fix the coin cell also.

Step 4: Fix Motor Wire to the Coin Crell

Picture of Fix Motor Wire to the Coin  Crell

After fixing the coin cell take the motor wires and connect it to the positive side and negative side to the coin cell.

Step 5: Finally Your Brush Bot Is Ready to Use

See video.


tomatoskins (author)2015-02-11

I made one of these for my sister a few years back. They are so much fun!

About This Instructable




More by kushal kumar:Air BoatTasty Pulao!  Potato and Cabbage Fry
Add instructable to: