In this instructable I will show you how to make an INDOOR storm window that will keep plenty of cold out of a room, while letting light continue to come in. My version uses less than $4 worth of supplies, mostly from the DOLLAR TREE store.
THE STORY :)
I moved into an apartment on the 3rd floor. all windows were single pane. The building was built in about 1970, so there was poor insulation, and only single pane sliding glass windows.
It was very cold the first night and the pipes nearly froze in the bathroom. the window rattled and I knew I was in trouble.
By creating my bubble wrap storm window, I was able to raise the temperature in the room 15 degrees F in the first hour. As you can imagine the savings and comfort increased rapidly.
As you can see I do have some depth to the window so making this work was kind of easy. I suppose using clear tape , magnets, velcro etc, you might find another way to put a storm window of this type in place.
Step 1: Step 1
In picture 2 you can see I bought clear tape and 1ft by 6ft rolls of bubble wrap from the Dollar Tree, (where everything is actually $1.00). I then found 2 wire coat hangers and unwound them to make a frame for the project.
I first rolled out two 6ft rolls side by side and taped down the middle. I actually bought 3 rolls, more on that later.