Buccaneer Keyboard

Step 3: Creating the side pieces

The sides were cut to shape with a scroll saw , with one of the sides needing a hole cut into it so the USB ports can be accessed. After cutting, the wood and brass were sanded and filed.

For the front and back supports a piece of wood was hand planed with a curve to match the shape of the side pieces. A sensible person would have bought, borrowed, or stolen a router for this one! After that all the wood was stained and waxed.

Comments

[richie_114]

I believe a sensible person would use a plane in such a situation. No sense wasting all the time required to set up a router or router table for such a small part. As a craftsman myself, I would've used the plane. Great 'ible by the way!