Print PDF
Favorite
Email
Step 7Stick and Puck
Get a small piece of hardwood for your sticks and pucks.
I used poplar. I think it was a 4"x24" from the Home Depot.
Sketch a good hockey stick shape, approximately 12" long, with a 3 to 4 inch 'blade'
Cut out with your jig saw. Use the one you cut out as a pattern for your second stick.
For the puck, I used a 2.5" hole saw bit on my drill. It left the pilot hole in the middle, but it doesn't affect performance.
Decorate your 'rink' as you see fit, and have some fun!
I used poplar. I think it was a 4"x24" from the Home Depot.
Sketch a good hockey stick shape, approximately 12" long, with a 3 to 4 inch 'blade'
Cut out with your jig saw. Use the one you cut out as a pattern for your second stick.
For the puck, I used a 2.5" hole saw bit on my drill. It left the pilot hole in the middle, but it doesn't affect performance.
Decorate your 'rink' as you see fit, and have some fun!
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
