Print PDF
Favorite
Email
Step 5Wire It Up
Cut holes in each side for electrical outlets.
Mount an electrical junction box just under the top on one of the center cross beams. Run wires to each outlet. Connect all wires in the junction box. A pigtail hangs on the outside of table is used to power all the outlets from house power.
Mount an electrical junction box just under the top on one of the center cross beams. Run wires to each outlet. Connect all wires in the junction box. A pigtail hangs on the outside of table is used to power all the outlets from house power.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
