Step 3: Rough Construction
Trim the sides down to tapper them and make the shape of a rock and or hill. also rough cut out a void in the sloped side opposite to the ledge, this will soon become the entrance to the bunker.
With a steak knife stab 45 degree down and out motion slices into the foam, don't be afraid to cut too much off or too deep it can be worked the less perfect the better. You can also use a slicing motion to create long slopes or sharp cliff faces.
Do not cut into the void and do not cut, trim or shape the ledge.
With a steak knife stab 45 degree down and out motion slices into the foam, don't be afraid to cut too much off or too deep it can be worked the less perfect the better. You can also use a slicing motion to create long slopes or sharp cliff faces.
Do not cut into the void and do not cut, trim or shape the ledge.
Remove these ads by
Signing UpFlag this comment as:
Not NiceInappropriateSpam
18
patriots8888
says:
Aug 17, 2010. 10:50 AMReply
foam
Visit Our Store »
Go Pro Today »
