Build Your Own Arduino

Step 6 PCB Files

If anyone is interested in etching their own PCB (printed circuit board) I have included the component and solder side pcb files.

I have added a zip file which contains 300dpi JPG files of the component side and solder side.

If you have questions, feel free to email me and I will help you out the best I can. Just note I have classes throughout the day, so sometimes my replies can take a day to respond.

Comments

[robonerd]

I know this post is from a ways back, but what program did you use to draw this design? Do you know of any free programs I can use to come up with something similar? Thanks for any help.

[viper24]

Fritzing is AWESOME.

[wamj]

+1

[DG91]

hey guys jelmareanvlad its right, i dont understand either, if anyone could replay ill be very glad thanks

[jelmareanvlad]

in the parts list you said that it was needed two 22pf capacitors and two 10uf capacitors but in the component part of the pcb are: one 10uf cap and 100uf cap!? where are the other two and why the 100uf cap hasnt been in the parts list? I dont understand...and what means "RAW" ?and why are there 2 power sources dc jack and "volts in +9 to 12v???????? PLEASE REPLY AS SOON AS POSSIBLE!! thank you in advance.... :((

[emedina94]

is this to make the arduino into a pcb so u dont have to use a breadboard
and if it is how do u make pcb 

[ArduinoFun]

yes the files are for making a PCB. There are several Instructables on creating your own PCB from home. I think I am going to make my next Instructable for creating a PCB using your Inkjet printer since most of the ones on here are for Laser printers.