Step 29: Preapring to Build the Eye
Now find a soldering iron that you don't mind destroying. ( you can actually just clean it up afterwards it doesn;t really destroy it)Plug in the soldering iron and wait for it to heat up.
Now find one threaded PVC connector ( 1.5" diameter is what I used).
Make sure the soldering iron is very hot before proceeding to the next step. ( don't touch it with your hand , but if you put water on it and see the water vapor then its hot)
Now find one threaded PVC connector ( 1.5" diameter is what I used).
Make sure the soldering iron is very hot before proceeding to the next step. ( don't touch it with your hand , but if you put water on it and see the water vapor then its hot)
Remove these ads by
Signing UpFlag this comment as:
Not NiceInappropriateSpam
Visit Our Store »
Go Pro Today »
