Print PDF
Favorite
Email
Step 35Build the Gripper Part
You will also need the following PVC parts , I believe one is called a threaded PVC connector and the other is a 2" length pipe with a piece of plastic sticking out in the back.
Put the threaded connector over the pipe piece and connect the end of that pipe to the gripper. Hot glue the end of the pipe to the gripper.
Put the threaded connector over the pipe piece and connect the end of that pipe to the gripper. Hot glue the end of the pipe to the gripper.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
