Print PDF
Favorite
Email
Step 11Assembling the Stick and Core
You should drill a hole in the core to allow for the stick. Be careful not to drill all the way through the core. To make things a little easier, I suggest you seat the core in some vice grips.
Once you have a hole, use some wood glue or epoxy to connect the core to the stick.
Once you have a hole, use some wood glue or epoxy to connect the core to the stick.
| « Previous Step | Download PDFView All Steps | Next Step » |
2
comments
|
Add Comment
|
Apr 30, 2011. 7:03 PMdabad
says:
Well you drill the hole, are you supposed to drill to the center? Or just enough to place the dowel in?
Reply
2
May 1, 2011. 6:22 AM
RocketScientist (author)
says:
RocketScientist (author)
says:
Drilling to the center would be best but that's more difficult in some materials than others. In the end you're just trying to get a good 'hold' between the head and dowel. It's very embarrassing to have the head suddenly fly across the room in the middle of practice, trust me.
Reply
 |
Add Comment
|
