Build Your Own PVC Johnboat for minimal cost and time.

Step 3 Early Frame Construction

The building started with me starting a bit before the sun went down but i started cutting out pieces 2 feet in length for the bottom area. I decided on the height by how high a 2 foot section of pipe went at a 45 degree angle. It was aprox. 17 Inches. Next boat I think I would choose a hull height that is about a foot or just under a foot next time 17 inches was a bit tall.

I did not have a camera during the beginning of the project just my phone

This is just a general idea of what I wanted the frame to look like more supports and tubing will be added soon.