Build a 6'-0" tall Wooden T-Rex Model

Step 7: BONUS!

As a "thank you" for all those who voted for this instructable I decided to add a Bonus Page!

Below you will find the CAD file for the Trex model pieces. 

I've also attached everything you need to make a Pteradon!!  This project has been sized to fit a single 24x48 sheet of 5.2mm ply.  You can buy this for under $8 at Home Depot.

The Pteradon will have a 4'-4" wingspan, and the body is around 2' long when complete.  I've included CAD and PDF files for this project. As before, print the template sheets on 24"x36" sheets.

Enjoy, and please post pics if you build it!! Thanks!

Comments

[Robert McGrath]

wonderful, thanks for making the plans available.

I adapted the Pterodon plans to cut with an Epilog Min laser at the Champaign Urbana Community Fab Lab.

Here is a blog article:

http://cucfablab.org/blog/pterodon-project-adapted-instructablescom-inlcudes-plans

[kaptaink_cg]

That's awesome!!

[somethingsaurus]

This is what I built with help from the local CNC.

https://lh6.googleusercontent.com/-TXCqsDGaS0Y/TqIsMP82IJI/AAAAAAAAJqw/dLMsojsG4XQ/s720/P1050086.JPG