Print PDF
Favorite
Email
Step 12Install the speakers
It's finally time to put in the speakers for real. Pull one cable out one end of the tube and the other speaker cable out the other end. Plug the terminals onto the speaker tabs as shown.
Now is a good time to test the system by plugging in a music player, throwing the power switch and seeing if music comes out.
Mount each speaker in its end using the six screws supplied. It's hard work. You can use an electric screwdriver (that's what we call a variable-speed drill with a #2 Phillips driver bit) to make it easier, but be careful as the screw reaches the end of its travel.
Now is a good time to test the system by plugging in a music player, throwing the power switch and seeing if music comes out.
Mount each speaker in its end using the six screws supplied. It's hard work. You can use an electric screwdriver (that's what we call a variable-speed drill with a #2 Phillips driver bit) to make it easier, but be careful as the screw reaches the end of its travel.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
