Build a Bioshock Drill Arm by ParkersTutorials

Step 5:

Screen shot 2011-02-13 at 12.37.16 PM.png

Screen shot 2011-02-13 at 12.37.54 PM.png

Screen shot 2011-02-13 at 12.38.09 PM.png

Screen shot 2011-02-13 at 12.38.27 PM.png

Screen shot 2011-02-13 at 12.38.51 PM.png

Screen shot 2011-02-13 at 12.45.04 PM.png

Screen shot 2011-02-13 at 12.49.53 PM.png

Next, I took a plastic Clorox wipe container and traced it on poster board twice. These will act as bracers to hold the electric screwdriver inside. I took the Clorox container and cut off the bottom and top parts, so it was like a tube. I took my 2 bracers and cut holes in them the diameter of the drill where I wanted the drill to be placed inside of the Clorox container. I hot glued the bracers inside of the Clorox container and inserted the drill. I hot glued the drill in place.