Print PDF
Favorite
Email
Step 4X-Axis Cutting Surface and Stands
Let's get to the meat of this project and skip ahead to the X-Axis for a minute (well, actually 8 minutes). It's important to mention that the x-axis rail support (the table or cutting surface) should have a double ply of MDF, if it is made as large as mine. My table measures about 2' x 4' which could be cut down a little if the application is for small sized projects. However, MDF is real cheap, so douple plying it should break the bank.
Note: if you do go the route of doubling the MDF, a larger aluminum angle will be necessary. Mine measured 1 1/4" x 1/8".
Note: if you do go the route of doubling the MDF, a larger aluminum angle will be necessary. Mine measured 1 1/4" x 1/8".
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
