Print PDF
Favorite
Email
Step 2Measure and Cut
- Measure the exact dimensions of your light.
- Measure and mark the wood to fit your light exactly.
- The frame should slope towards the south (for maximum solar gain in the winter). Therefore, the back of the frame should be at least 4" higher than the front.
- Cut and label your pieces. Remember that the two sides should have an angled top.
- Measure and mark the wood to fit your light exactly.
- The frame should slope towards the south (for maximum solar gain in the winter). Therefore, the back of the frame should be at least 4" higher than the front.
- Cut and label your pieces. Remember that the two sides should have an angled top.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
