Introduction: Build a DIY Camera Stabilizer for Under $5

In this instructable, we will show you how to build a DIY camera stabilizer for under $5. This DIY camera stabilizer is easy to build and easy to carry around if you don't have a tripod. All you need is a string and a tripod screw.

Step 1: Get a String of 5 - 7 Feet Depending on Your Height.

Step 2: Step on the Midpoint of the String and Make the Two Ends Together.

Step 3: Screw the Two Ends at the Bottom of Your Camera Using a Tripod Screw.

Step 4: Now You Have Your DIY Camera Stabilizer!

When filming videos, step on the string and hold the camera tight to stabilize it. This allows you to pan and tilt your camera smoothly and get the perfect camera movements.

This DIY camera stabilizer is very easy to carry in your pocket or bag so you can film steady videos any time anywhere.
Check out our YouTube channel for more camera tips and tricks! https://www.youtube.com/c/filmorawondershare

Comments

About This Instructable

373views

2favorites

License:

Bio: Filmora is the perfect video editor for beginners and intermediate users. Here we will show you tips and tricks to make your videos look more ... More »
More by Filmora Video Editor:Creative Camera HacksHow to Record IPhone & IPad Screen on Mac How to Vlog -- 5 Tips for Making Better YouTube Videos!
Add instructable to: