Print PDF
Favorite
Email
Step 4Hardware(3): Leg Attachment
(3) See the diagram below to reinforce the legs so they can be attached very securely to the motors. To make sure that they were attached well I used a right angled peice of steel to hold the conduit from two sides. Use locking nuts and locking washers here.
--Note--:
try to make it so the legs can be somewhat easily detached from the motors so that you can modify the leg bends if needed after later testing (after you finish the electronics)
--Note--:
try to make it so the legs can be somewhat easily detached from the motors so that you can modify the leg bends if needed after later testing (after you finish the electronics)
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
