With Instructables you can share what you make with the world, and tap into an ever-growing community of creative experts.
Here is a interesting intructable. It use POGs.I am sure a lot of people are going to ask " whats the hell is a POG?"POG was a game ...
Here are the parts you will need :1 x wooden clothes-pin1 x elastic rubber bandSome old pogs ( remember those? )http://en.wikipedia.org/wiki/PogsThe tools you will need :1 x pair ...
You will simply need to drill a hole throught the clothes-pin. You can start with a smaller drill bit and then finish with the a bigger one.
You can disassemble the clothes-pin to drill it. This could help you out. I took a smaller dril bit to make the first hole so I do not ...
You will now pass the rubber band through both hole you just made.
You simply follow these next few step. Open the clothes-pin and get one loop in it.
Secure the rubber on top and do the same thing like the previous step.
Pull on the one of the two piece of rubber between the clothes-pin. You will need to give some slack by pulling on the rest. Give yourself a ...
Get those priceless pogs of yours. You need to cut a V shape in them. If your not old enough you probably don't know POGs! Just take a ...
Your know ready to test your device. You simply put the POG in the clothes-pin.
Pull back on the rubber band. Remember to press and hold the POG in place. If you donât the POG will ejected automatically. You simply press down on ...
Voila! You are now ready to aim at your little brother. Have fun! Jerome Demers Sherbrooke, Quebec Canada
None (All Rights Reserved)
Knex gun: Bolt-action POG Pistolby charge11595
3D Printed Miniature Engine (Bottom End)by TunerFreak
FRISBEE FLIPPERSby truwebs
Knex Disc Throwerby knextremist
Fragrant Microwavable Heating Padsby kathrynl
Join 2 million + to receive instant DIY inspiration in your inbox.
Download our apps!
© 2016 Autodesk, Inc.