Build a Remote Control Deadbolt

Step 7 Connect the Springs!

If everything else is in place, it's time to connect the springs. By now, you probably know the correct distance to put them away from the solenoid so go for it. I used common drywall screws to secure the springs to the wood.

Since this is controlled by X10, you could easily integrate this into a home automation setup, and unlock your door using a remote, computer, or via a Windows Media or LinuxMCE home theater PC on your television!

Hopefully you're still with me, and this instructable works well for you. If you have any questions, please feel free to leave me a comment, and digg it if you dugg it!

Check out my other instructables!

Stuff

Comments

[hilldweller]

Could you please provide information on the solenoid please, such as the manufacturer, model number, and where they are available?
I've tried googling it but most all are valves and pool supply stuff.
Thanks in advance.

[reaver26]

hello.. your guide is very helpful but the only problem is the "solenoid" its really hard to acquire one here in the philippines. but anyway thanks