Print PDF
Favorite
Email
Step 5Make it: Testing
Add the EEPROM, connecting Vdd and Vss. Also add a 4pin header as shown in the photo.
Your basic Propeller setup is now complete. Plug your Prop Plug into the headers, connect the usb cable and fire up the Propeller Tool. Hit F7 and make sure you can communicate with the Prop
Your basic Propeller setup is now complete. Plug your Prop Plug into the headers, connect the usb cable and fire up the Propeller Tool. Hit F7 and make sure you can communicate with the Prop
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
