Print PDF
Favorite
Email
Step 3Round the Engine's Boiler Finally on the Belt-sander
1. Finish the boiler on the belt sander. Grind down to the pencil line from the compass; watch the wood come down on both ends; go little by little so you don't shoot past the pencil marks.
FRIENDLY CAUTION -- Watch your knuckles as you twist the boiler back and forth!
2. Radius the bottom edges too, because radius edges resist damage and hold paint better too.
FRIENDLY CAUTION -- Watch your knuckles as you twist the boiler back and forth!
2. Radius the bottom edges too, because radius edges resist damage and hold paint better too.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
