With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
How to turn a 10$ microscope and a 5$ USB camera into a cool digital microscope in 60 minuets.
Just remove any screws and plastic cover that is not needed.This webcam cost me 5$ - very simple low resolution web cam.
Place hot-glue over the electronic side of the camera so it won't get damaged.
Use a cutter or a small knife to remove the isolation (BE VERY CAREFUL - DO NOT CUT YOURSELF!) Cut the red and black wires and reveal the copper wiri...
connect a 50 to 330 Ohm resistor to the red wire and the other side to the long LED line . Then connect the black wire to the short LED lead.
1. Solder the LED lines and connected and isolate with isolation electric tape. Remove the mirro from the bottom and connect a toothpick to the two ho...
while you view the image via the SW used for the webcam - position it so you get a clear image . you may need to play with it for a while . After you ...
Pictures of Pollen (150x 300x 600x)
Pictures of Cotton(150x 300x 600x)
Pictures of Grass(150x 300x 600x)
============================================ Please Rate on the right of the page ===========================================I love comments a...
Remove these ads by
Signing Up
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Visit Our Store »
Go Pro Today »
Thanks